SHIELD® Felts for Heat Transfer (Sublimation) Printing

Transfer Print Felt Installation

United States Supply has been intricately involved in the supply of these felts for over twenty-five years. We have developed and incorporated many improvements during this time to insure that our Transfer Printing Felts are the finest in the world.
Our Research and Development staff constantly evaluates new fibers, chemical treatments, and manufacturing processes to provide the highest quality and most economical felt available today.

Construction

Styles

• SUBLIME 7000® - recommended for felts up to 3.81 meters wide (150"). Density of 2,200 - 2,500 g/m2 with a standard thickness of 7- 8mm.
• RYNO 9000® - recommended for high temperature and/or chemical applications. Density of 2,200 - 2,500 g/m2 with a standard thickness of 7 - 8mm.
• Nomex® is the normal fiber used. Options are available, however, and custom felt development is welcomed.
  

Special Features

• Chemical treatment and manufacturing process retards absorption of inks and chemicals.
• Pre-heat set to speed tracking set up during installation.

Standard Sizes and Ordering Information

• LENGTH - 1.06 to 25 mtrs (3.5 - 82')
• WIDTH - 50 to 4953mm (2 - 195")
• THICKNESS - 6 -8 mm (0.23 - 0.31")
  
  When ordering, please advise us of the following:
  1. Machine Type and Model number, e.g., Lemaire 30, Bates TP-16, Gessner 60, etc.
  2. Heated Cylinder Width.
  3. Maximum Fabric Width and Type run, e.g., 1.57 meter heavy upholstery fabric.
  4. Date required.
  5. Any precondition we should consider, e.g., excess tension or temperature requirements, heavy amounts of flame, soil retardant or any other chemical used that may be detrimental to the Nomex® fiber, etc.
  Send To: sales@ussupplyinc.com
  We will respond to your request immediately.

Download a Printer Friendly Version

Get installation instructions here: Transfer Print Installation